Seite 1 von 1

Streifen

BeitragVerfasst: Donnerstag 16. Oktober 2014, 21:00
von Cereso
Hallo,

ich hätt da gerne wieder mal ein Problem... Ausnahmsweise mal nicht mit der Astrometrie, die tut es.
Ich habe saubere Startbilder (Flats, Darks, Bias) und Theli zaubert mir derbe Streifen in die Master-Flats etc. Danach haben die weights natürlich auch Streifen, und die koaddierten Bilder auch.
Als Beipiele hier ein normales Flat (nur gestretcht):
Flat_Riccardi-1_002_3.jpg

Das Master-Flat sieht dann so aus:
Flats_3.jpg

Sowie das dann nicht unerwartete Endergebnis (Ausschnitt):
coadd_6.jpg


Ich habe Theli 1.9.5 und die Gui 2.9.5 neu installiert,vorher hatte ich solche Probleme nicht. Hat jemad eine Idee?

Grüße,

Carsten

Re: Streifen

BeitragVerfasst: Freitag 17. Oktober 2014, 14:01
von mischa
Da hast du wohl die overscan-korrektur eingeschaltet obwohl deine kamera keinen overscan hat?
Wie sieht dein kamera.ini aus?

mischa

Re: Streifen

BeitragVerfasst: Freitag 17. Oktober 2014, 21:04
von Cereso
Hallo Mischa,

das Instrument config sieht so aus:

# **************************************************************
# Instrument config file created by THELI
# **************************************************************

# Name of the instrument (must be unique!)
INSTRUMENT=Atik383L_RIC

# Number of chips
NCHIPS=1

# We need to export these
export INSTRUMENT
export NCHIPS

# Load directories for programs
. progs.ini

# Geographical latitude of the observatory
OBSLAT=53

# Pixel scale in x and y [degrees] (CDELT1/2 keywords)
PIXSCX=-0.0005
PIXSCY=0.0005

# Pixel scale in arcsec
PIXSCALE=1.8

# Detector gain
GAIN=1.0

# Overscan regions. The values are the x-range.
# The min is given by OVSCANX1, the max by OVSCANX2.
# We need separate regions for each chip.

OVSCANX1=([1]=2)
OVSCANX2=([1]=4)

# Sections for the cutting. Select those pixels that receive light.
# Give min values for x and y, and the extent in x and y.

CUTX=([1]=6)
CUTY=([1]=6)
SIZEX=([1]=3352)
SIZEY=([1]=2530)

# Reference pixels for each chip.

REFPIXX=([1]=1681)
REFPIXY=([1]=1268)

# Camera type
TYPE=OPT

Da sind tatsächlich overscan-Parameter ungleich null vorhanden.

Grüße,

Carsten

Re: Streifen

BeitragVerfasst: Samstag 18. Oktober 2014, 01:52
von mischa
Cereso hat geschrieben:Hallo Mischa,

das Instrument config sieht so aus:

# **************************************************************
# Instrument config file created by THELI
# **************************************************************

# Name of the instrument (must be unique!)
INSTRUMENT=Atik383L_RIC

# Number of chips
NCHIPS=1

# We need to export these
export INSTRUMENT
export NCHIPS

# Load directories for programs
. progs.ini

# Geographical latitude of the observatory
OBSLAT=53

# Pixel scale in x and y [degrees] (CDELT1/2 keywords)
PIXSCX=-0.0005
PIXSCY=0.0005

# Pixel scale in arcsec
PIXSCALE=1.8

# Detector gain
GAIN=1.0

# Overscan regions. The values are the x-range.
# The min is given by OVSCANX1, the max by OVSCANX2.
# We need separate regions for each chip.

OVSCANX1=([1]=2)
OVSCANX2=([1]=4)

# Sections for the cutting. Select those pixels that receive light.
# Give min values for x and y, and the extent in x and y.

CUTX=([1]=6)
CUTY=([1]=6)
SIZEX=([1]=3352)
SIZEY=([1]=2530)

# Reference pixels for each chip.

REFPIXX=([1]=1681)
REFPIXY=([1]=1268)

# Camera type
TYPE=OPT

Da sind tatsächlich overscan-Parameter ungleich null vorhanden.

Grüße,

Carsten


Setze beide auf Null, dann wird dein Problem verschwinden :-)

mischa

Re: Streifen

BeitragVerfasst: Samstag 18. Oktober 2014, 08:29
von Cereso
Da hattest Du natürlich wieder mal recht.
Vielen Dank!

Grüße,

Carsten